1. Use the manual function of the pipe cutting machine to feed the material into the pipe cutting machine;
2. Set the length of pipe cutting and the speed of pipe feeding;
3. Select the automatic mode for automatic pipe cutting;
4. After the pipe material is cut, the machine will stop automatically;
5. When an emergency stop is needed, directly press the emergency stop button, and continue to run after recovery;

Hydraulic splitter refers to the hydraulic transmission of the upper roller, and the hydraulic fluid-free hydraulic transmission is permitted by the hydraulic oil in the hydraulic cylinder; the lower roller is rotationally driven, and the gear is engaged by the reducer output gear, providing torque for the roll plate, There is a roller under the lower roll and can be adjusted. The upper roller is a drum shape, and the linearity of the article is improved, which is suitable for a variety of cross-sectional shapes.

It is an inevitable problem that the saw blade is worn out during the long-term operation of the machine. It will increase the processing cost of the enterprise, reduce the production efficiency of the enterprise, and affect the quality of the workpiece. So how do we solve this problem?

Classification of pipe cutting machines
1. Fully automatic type: Fully automatic metal circular sawing machine mainly has two forms, one is a single material fully automatic sawing, a material must be manually added after cutting a new material, the other is Material rack, after one material is sawed, another material is actively transported.
2, semi-automatic type: manual feeding, the machine head is driven by pneumatic or hydraulic pressure to realize automatic sawing;

1. Carry out a detailed inspection of the power switch of the aluminum cutting machine, the tightness of the saw blade, and the saw blade guard or baffle. The console is stable and there should be sufficient lighting for night operations.
2. Turn on the main switch of the aluminum cutting machine, try a few turns without load, and allow it to start after confirmation.
At work:
1. Operation with gloves is strictly prohibited. If dust is caused during operation, wear a mask or face shield.
2. Don't try to cut small and short workpieces that are not clamped.
3. Do not perform strong cutting and sawing operations, and let the machine idling for more than 10 seconds to make the motor reach full speed before cutting.

The automatic punching machine is a newly developed high-precision product with energy saving, high efficiency, stable performance and two patents-bow punching machine.
Main feature
1. Incomplete circles above any semicircle can be played.
2. The punching speed is high, up to 0.35 seconds/hole.
3. Using windows XP operating system, powerful, fast and agile.
4. Standard configuration 8.4 (special configuration 10.4) inch color industrial display large window target type display, not hurting eyes.
5. The imported granite work surface is not worn.