The automatic shrinking machine is a computer-controlled automatic equipment. The quality of the machine is not only related to the manufacturing factors of the machine tool itself, but also related to the use, maintenance and maintenance of the machine. Therefore, the automatic shrinking machine is in the process of using , Must be operated in accordance with the company's instruction manual.
1. The processed sheet must be relatively flat and can be leveled. It is strictly forbidden to process sheets with poor flatness and severe corrosion to avoid danger and damage to the machine tool.
2. The gap between the ball screw and the linear guide has been optimally adjusted by the company before leaving the factory. Under any circumstances, please do not adjust it yourself

With the continuous improvement of people's living standards, the automation level of pneumatic pipe cutting machines has gradually improved. Some companies have replaced manual pipes with low-energy pneumatic pipe cutting machines that were initially imperfect. This has continued to improve and develop step by step. Today, Shengde pneumatic pipe cutting The machine has developed rapidly, and its footprint can be found almost everywhere in the country. It can be said that it has occupied a dominant position in the market, and has gradually transformed from the original domestic market to enter the international market. It also shows that the development of this industry is very ideal, and The future is bright.
It is difficult for many pneumatic pipe cutting machine companies in China to achieve this.

1. Use the manual function of the pipe cutting machine to feed the material into the pipe cutting machine;
2. Set the length of pipe cutting and the speed of pipe feeding;
3. Select the automatic mode for automatic pipe cutting;
4. After the pipe material is cut, the machine will stop automatically;
5. When an emergency stop is needed, directly press the emergency stop button, and continue to run after recovery;

Hydraulic splitter refers to the hydraulic transmission of the upper roller, and the hydraulic fluid-free hydraulic transmission is permitted by the hydraulic oil in the hydraulic cylinder; the lower roller is rotationally driven, and the gear is engaged by the reducer output gear, providing torque for the roll plate, There is a roller under the lower roll and can be adjusted. The upper roller is a drum shape, and the linearity of the article is improved, which is suitable for a variety of cross-sectional shapes.

It is an inevitable problem that the saw blade is worn out during the long-term operation of the machine. It will increase the processing cost of the enterprise, reduce the production efficiency of the enterprise, and affect the quality of the workpiece. So how do we solve this problem?